Assembly Instructions
The vertical saber stand requires some assembly. Below you can find instructions on how to assemble it.
|
The package should include: - base plate - front plaque holder - rear shelf - 2x long posts - 2x short posts - 8 screws - 4 brass collars - 4 aluminum covers |
 |
Screw the two long posts to the base plate where the holes are closer to the edge. The screw heads should sit inside the indented holes. |
 |
Screw the two short posts to the base plate where the holes are further from the edge. The screw heads should sit inside the indented holes |
 |
Place the angled plate holder on top of the two short posts near the front of the base plate. Insert 1 brass collar per screw hole with the wider side facing up. Screw the plaque holder to the posts while keeping the brass collars centered. |
 |
Place the back shelf on the long posts, with the cutout facing inwards. Insert 1 brass collar per screw hole with the wider side facing up. Screw the rear shelf to the posts while keeping the brass collars centered. |
 |
Screw each of the aluminum caps using the threaded brass collars for the rear shelf and the front plaque holder. |
Notes
- The threaded holes in each of the posts may not be perfectly straight. You can rotate the posts to adjust alignment of the rear shelf and front plaque holder