SDS Pixel Emitter Connector V2 (PxE)

Here we have our Pixel emitter PCB used to install the hilt side connection for a pixel saber. Great for lighting up the emitter of your saber when there isn't a pixel blade inserted.

You can either choose the long pin, short pin, and even just the PCB if you want to use your own pins. All options have the onboard LEDs and resistor soldered on already.

Please refer to the wiring guide for soldering up the PCB. Note that if the polarity of the PCB wiring or the battery is reversed the onboard LEDs may be damaged.

Specs:

• 4 pins for Positive and Negative connections, 1 pin for Data, and 1 pin for Blade Detection
• 19 onboard LEDs (16x SK6805-EC15 and 3x SK6805-EC10) placed in parallel with the main blade
• data line is pre-resistored
• each pin is rated for 5.60A 20% de-rated maximum current and 7A peak current
• 2 solder pads for Positive, 3 solder pads for Negative, 1 solder pad for Data, and 1 solder pad for Blade Detect

If you need extra pins you can find them on sites such as Digi-key or Mouser

Pin product numbers:

• Long Pins (Mill-Max): 0928-0-15-20-77-14-11-0
• Short Pins (Mill-Max): 0900-2-15-20-75-14-11-0